Mar 12 2007

More with the pottery

Posted by briancarnell in Uncategorized

More schtuff.


Goofing around with my sgraffito tool. Clear glaze was rather thick and it’s a very strange-looking mug now, alas.
4.25″ tall X 3.75″ rim diameter. I really need to remember to watch the consistency on that glaze.


tart warmer, salt-glazed. 4.5″ tall.


bowl,salt-glazed. interior crackled very nicely! 3″ tall X 8″ rim diameter.

Most of my stuff in this kiln load requires re-fire because some things in certain parts of the kiln didn’t fire properly – storm front came through and dropped the temp in the back at a bad time is what we think. It’s a process that isn’t about human control in many ways, it’s always a surprise, it seems. So I had some things (and many others as well) that had really f-ed up glaze flow, they didn’t look ‘done’ even though all of the cones were down. Oh well.

Mucked around with porcelain for the first time yesterday – a bowl, a vase, and a teabowl. Very different – soft, easier to center, really lovely. I want to see how the surface is different with the different clay body…I saw some amazing things in porcelain come out of the first kiln load.

Mar 07 2007

pallets and pallets and pallets

Posted by briancarnell in Uncategorized

Programs have arrived – now, for the mailing to begin! *thud*

Mar 05 2007

photos

Posted by briancarnell in Uncategorized

Here are a few shots I don’t think I’ve gotten up here yet, and what came out of the first salt firing – the kiln is ready to go again, so hopefully I’ll get some more stuff back this week.

/files/images/pottery/2007_03_05/PICT4093.jpg
/files/images/pottery/2007_03_05/PICT4094.jpg
A cassarole dish. It was made for someone, and I think I forgot to measure it, but at least I remembered to take a photo.

/files/images/pottery/2007_03_05/PICT4116.jpg/files/images/pottery/2007_03_05/PICT4118.jpg
This was an experiment – I wanted to try and throw a chip/dip tray in one piece. This was the result. Again, I gifted it without measuring. I’m fairly happy with it (I think next time I’ll make a deeper dip bowl, it’s hard to dip large tortilla chips in a shallower vessel) and will likely make more at some point.

This is my first salt class, so I’ve been working at experimenting with surface decoration and trying to work with, not against, the salt. I’ve been working primarily with stoneware, but I’m tempted to muck around with some porcelain – it reacts to the salt differently…almost opalescent.
/files/images/pottery/2007_03_05/PICT4119.jpg
/files/images/pottery/2007_03_05/PICT4120.jpg
This small bowl has a glaze liner (and I am very pleased with the liner, it’s an amazing blue, these pictures don’t do it justice) and the surface is just a little cobalt slip and the salt glazing itself. I love the warm brown of the salt and the rustic pitted appearance from the little mini salt explosions when we would salt the kiln. Size 3.25″ tall, 4.75 rim diameter.

/files/images/pottery/2007_03_05/PICT4122.jpg
/files/images/pottery/2007_03_05/PICT4124.jpg
Still with the out of round, I do like modifying wheel-thrown forms – this bowl is oval, obviously. Much like the previous piece, but I used white slip and applied it rather thick for texture and to see how it behaves differently. As you can see, the slip has an interesting crackle effect. This was probably in the center of the kiln – as you can see, it has less pitting than the other bowl. Size 3″ tall, 5.75 rim widest.

/files/images/pottery/2007_03_05/PICT4128.jpg
I put a plate in there to see what would happen – I just swirled some glaze (a different one than I used for the bowls, but I ended up with very similar effects) in the center. Less surface pitting, but that same rustic brown salt glazing on untreated surfaces. Size 10″ diameter.

/files/images/pottery/2007_03_05/PICT4130.jpg
This one is fascinating – I made this rhenishware-style jug last term, and we pit-fired after bisque, but I don’t know that we let it go long enough because the smoke effects were practically non-existent. So I figured I’d put it in this kiln load to see what the salt would do. I rinsed the inside before I put some matte salt glaze in there (dripping it on the outside a bit for a very rustic feel) as liner. There must have been some residue inside that reacted in really violent ways to the glaze (and possibly to the salting – there was no glaze spillage, this didn’t stick to the kiln shelf!) because the bottom blossomed three-ways. (look closely you can see some of the cracking) The inside looks like melted metal and burnt cheese…damn interesting.

/files/images/pottery/2007_03_05/PICT4132.jpg
I wanted to make a vase, a tall (well, tall for me) vase. I did a lot of finger texturing because salt loves texture, applied the bottom separately because I wanted a really present bottom edge with a grounded feel, and used the same glaze for the liner as for the bowls. Size 12″ tall, 3.5 rim diameter.

I’ve put one tile in this next salt load, but decided just to put what I had not yet glazed into a regular high-fire load. I had two develop a strange crack on one edge (the tenmoku developed it on the bottom, the dunham blue along the left side)..no glaze movement, nothing there before I glazed. I don’t know where they were in the kiln. I suspect the temp was brought up too quickly, but that’s just guessing.They are sturdy and functional … can’t sell them, but I imagine they’ll find homes and behave in appropriate trivet or wall-decorative form with just a little more personality than the others. Aneebodee need a tile?
/files/images/pottery/2007_03_05/PICT4135.jpg/files/images/pottery/2007_03_05/PICT4138.jpg

These next two I experimented with staining (two different tones of green) under a very transluscent celedon.
/files/images/pottery/2007_03_05/PICT4140.jpg/files/images/pottery/2007_03_05/PICT4145.jpg
All tiles are 8.5″ X 8.5″. And, clearly, I continue to be vexed by shooting shots of these tiles with their shiny glaze picking up the light in strange ways and all. But you get the gist of their appearance, at least. You do need to see the knotwork in person to appreciate it, I simply can’t get these photos to show the detail.

Feb 16 2007

Ooooh astrolabe

Posted by briancarnell in Uncategorized
Feb 12 2007

Open it? Like this?

Posted by briancarnell in Uncategorized
Feb 09 2007

Useful info

Posted by in Uncategorized

Did I already post about this?

The Middle English Dictionary’s available for free online now.

Information about the dictionary: http://ets.umdl.umich.edu/m/mec/.

Feb 08 2007

I want to see Avenue Q

Posted by in Uncategorized

Not that anyone asked.

But how you not love the lyrics to What Do You Do with a B.A. in English?


What do you do with a B.A. in English,

What is my life going to be?

Four years of college and plenty of knowledge,

Have earned me this useless degree.

I can’t pay the bills yet,

‘Cause I have no skills yet,

The world is a big scary place.

But somehow I can’t shake,

The feeling I might make,

A difference,
To the human race.

Puppets, a la Muppets as the writers and puppeteers are ex-Sesame Street people. I was a Sesame Street kid (one, one peanut butter sandwich, ah ah ah!), I loved Fraggle Rock and Dark Crystal and just about anything Henson did – so this odd tribute, and snarky lyrics, are riiight up my alley.

Feb 02 2007

w00t. and to the printer, too – out, out damn spot!

Posted by in Uncategorized

I should have posted this yesterday, but I went home sick:

It’s up!!!

Feb 02 2007

In the news, catching up again

Posted by in Uncategorized
Jan 31 2007

problem solving, the medieval way

Posted by in Uncategorized

We have an aging, increasingly cranky copier in the office.

And no budget to replace it.

I have taped this to the copier: